Advertisement
Cleaning Filters
Please Note: It is very important to keep the filters clean to receive
maximum performance from the vacuum. Not cleaning and not replacing
your filters regularly can reduce the suction power and cause
overheating of the motor.
There are 2 HEPA filters. The first, is the
pre-motor filter, located under the dust
container cover Fig 18
The second is the exhaust filter located at
the back of the vacuum Fig 19
Both HEPA filters require regular cleaning
and periodical replacement.
FIG 19
HEPA FILTERS MUST BE REPLACED PERIODICALLY OR WHEN THEY
BEGIN TO DETERIORATE. TO PURCHASE FILTERS CONTACT THE
DISTRIBUTOR
2
1
To access the exhaust filter, unclip the
exhaust grill from the back of the
vacuum Fig 19 - 1.
1
Hold on to the small hook on the
bottom of the filter and gently pull out.
Fig 19 – 2. To refit the HEPA filter,
hold onto the small hook and insert the
top first then push in the bottom of the
filter.
A small brush is located on the dust
container Fig 18 -1. This brush is to be
used to clean the HEPA filters.
FIG 18
Advertisement
