68009297001-B_Text.fm Page 5 Thursday, December 10, 2015 1:40 PM
Getting to Know Your Vehicular Charger
Note:
Repeater (VRS) Status LED and Repeater (VRS) Status Toggle are only used
when there is a repeater.
Programming Port
- Programming via
RLN5671 Field
Programmer
only by service
personnel.
Heatsink
VRS Status LED
VRS Status Toggle -
Allows the user to
enable the repeater
when no radio is
present.
RJ11 - Future Use
(Display Module)
Power Connector -
Attaches to Power
Harness supplied
with unit.
Ground Stud - This can
be used to tie the
Vehicular Charger to
the chassis ground.
Charger
Status LED
5