Securing The Radio In The Vehicular Charger - Motorola NNTN7624 User Manual

68009297001-B_Text.fm Page 11 Thursday, December 10, 2015 1:40 PM

Securing the Radio in the Vehicular Charger

The NNTN7616 Vehicular Charger is equipped with a feature that reduces the risk of a
portable radio (or battery alone) in the pocket from becoming dislodged and potentially
hazardous in the event of a vehicular collision. Operators are instructed to follow the
vehicular charger installation instructions and to use this feature as follows:
1. Anyone intending to operate the vehicular charger is advised to locate and
become familiar with:
• The Ballistic Nylon Strap. (Tri-Glide adjustment between battery alone or radio
with battery attached)
• The Retention Housing (Latch)
• The Engagement Bar (Faceplate).
2. When the vehicular charger is not in use, the latch may be engaged to the Top
Engagement Bar on the Faceplate.
3. To use the vehicular charger, disengage the latch from the Top Engagement Bar
on the Faceplate.
4. Insert the portable radio or battery alone into the charger pocket. For Non-Display
Models, insert the Radio with Battery such that the Main Speaker faces UP; Belt-
Clip (if installed) and Battery Contacts face DOWN. For Large Display (Rear)
Models, insert the Radio with Battery such that the Main Speaker faces UP; Large
LCD Display and Battery Contacts face DOWN. For Battery Alone, contacts face
DOWN.
11