Radio With Battery, Antenna, Psm Or Rfa Attached - Motorola NNTN7624 User Manual

Vehicular charger (impres compatible system)
Hide thumbs Also See for NNTN7624:
Table of Contents

Advertisement

68009297001-B_Text.fm Page 12 Thursday, December 10, 2015 1:40 PM
5.
For radios with an antenna installed, loop the strap between the base of the
antenna and base of the channel selector, and then engage the latch onto the Top
Engagement Bar on the Faceplate. Adjust the strap through the Tri-Glide to
secure radio with battery attached within the Vehicular Charger (refer to Figure 4).
Figure 4 . Radio with Battery, Antenna, PSM or RFA Attached
— or —
For radios with a Public Safety Microphone (PSM) and RF Adapter installed,
adjust the strap through the Tri-Glide to secure radio with battery attached within
the Vehicular Charger (refer to Figure 4).
— or —
For charging a nickel or non-NNTN7038 lithium battery that is not attached to a
radio, loop the strap over the top of the battery, then engage the latch onto the Top
Engagement Bar on the Faceplate. Adjust the strap through the Tri-Glide to
secure battery within Vehicular Charger (refer to Figure 5).
Note:
Battery is inserted contacts facing DOWN.
12

Advertisement

Table of Contents
loading

Table of Contents