Charger Overview - Motorola IMPRES 2 PMPN4350 User Manual

Charger Overview

3
1. Radio charging pocket.
2. Battery charging pocket.
3. Charger indicator - battery charge status indicator.
4. Programming/fleet management port; requires a Communication
Module (Part Number: NNTN8870). Contact your local Motorola
Solutions Sales Representative to order this item.
5. USB Type A accessories charging port.
Note:
USB Type A is not applicable to PMPN4500.
6. USB-C port - power supply input and for radio communication.
The IMPRES
™
care system. All you need to do is follow these simple steps:
1. Place the radio/IMPRES battery into the charger.
2. Remove the radio/IMPRES battery when it is fully charged (LED
turns steady GREEN).
The charger pockets accommodate either a radio with an IMPRES
battery attached and/or an IMPRES battery alone.
Additionally, the charger is equipped with a USB Type A Power Output
that facilitates the charging of accessories up to a maximum 7.5 W of
power (5 V at 1500 mA). This USB Type A Power Output only provides
charge as it becomes available from the charger. The charge priority is
given to Radio Charging and Battery Charging.
Adaptive Charger System is a fully automated battery
4
5 6
4
1
2