MN004263A01-AH
Chapter 2 : Charger Overview
Chapter 2
Charger Overview
Charger Overview
1
3
Table 1: Charger Overview and Description
Item
1
2
3
4
5
6
The charger pockets accommodate either a radio with an IMPRES battery attached and/or an IMPRES
battery alone.
The charger is equipped with a USB Type A power output that facilitates the charging of accessories
up to a maximum 7.5 W of power (5 V at 1500 mA). This USB Type A power output only provides
charge as it becomes available from the charger. The charge priority is given to radio charging and
battery charging.
8
Description
Radio charging pockets
Battery charging pockets
Charger indicator - battery charge status indicator
Programming/fleet management port - requires a Communication Module
(Part Number: NNTN8870). Contact your local Motorola Solutions Sales
Representative to order this item.
USB Type A - accessories charging port.
NOTE: USB Type A is not applicable to PMPN4500.
USB Type C - power supply input and for radio communication.
2
4
5
6