Charging Procedure; Charger Back View - Motorola IMPRES NNTN8845 User Manual

Charging Procedure

1. Plug the charger end of the power supply cord into the power
receptacle located at the back of the charger.
2. Plug the wall receptacle end of the power supply cord into the
appropriate AC outlet. A successful power-up sequence is indicated
by a Single Green Blink on the charger indicator.
3. Insert an IMPRES battery, or a radio with an IMPRES battery (radio
can be in the ON state only when the radio is transmitting data
wirelessly. Otherwise, turn OFF the radio), into the charger
pocket by:
a. Aligning battery contacts with the charger contacts.
b. Pressing the battery into the pocket, ensuring complete contact
between charger and battery contacts.
4. To remove a radio or IMPRES battery from the charger, pull straight
up until the battery completely clears the charger housing.

Charger back view

1. Programming Port - program the charger.
2. Dual USB ports - power source to wireless accessories and fleet
management.
3. DC inlet - connect to power supply.
Once the IMPRES battery is properly seated into the pocket, the
charger indicator illuminates, indicating the charger has recognized the
presence of the battery. Refer to the charging indicators in Table 1.
1
2 3
4