Emerson Rosemount 8732EM Quick Start Manual page 12

Quick Start Guide
Table 5-2:
125°C)
Cable kit #
08732-0065-1001
(feet)
08732-0065-1002
(meters)
08732-0065-1003
(feet)
08732-0065-1004
(meters)
Table 5-3:
80°C)
Cable kit #
08732-0065-2001 (feet)
08732-0065-2002 (meters)
08732-0065-3001 (feet)
08732-0065-3002 (meters)
Cable requirements
Shielded twisted pairs or triads must be used. For installations using the
individual coil drive and electrode cable, see
be limited to less than 500 feet (152 m). Consult factory for length between
500–1000 feet (152–304 m). Equal length cable is required for each. For
installations using the combination coil drive/electrode cable, see
Combination cable lengths should be limited to less than 330 feet (100 m).
12
Component cable kits - extended temperature (-50°C to
Description
Kit, Component Ca-
bles, Ext Temp. (in-
cludes Coil and Elec-
trode)
Kit, Component Ca-
bles, Ext Temp. (in-
cludes Coil and Elec-
trode)
Kit, Component Ca-
bles, Ext Temp. (in-
cludes Coil and I.S.
Electrode)
Kit, Component Ca-
bles, Ext Temp. (in-
cludes Coil and I.S.
Electrode)
Combination cable kits - coil and electrode cable (-20°C to
Individual cable
Coil
Electrode
Coil
Electrode
Coil
Intrinsically Safe Blue
Electrode
Coil
Intrinsically Safe Blue
Electrode
Description
Kit, Combination Cable, Standard
Kit, Combination Cable, Submersible
(80°C dry/60°C Wet)
(33ft Continuous)
Figure
Rosemount 8732EM Transmitter with Modbus Protocol
November 2017
Alpha p/n
Not available
Not available
Not available
Not available
Not available
Not available
Not available
Not available
5-3. Cable lengths should
Figure 5-4.