Emerson Rosemount 8732EM Quick Start Manual page 10

Quick Start Guide
Figure 5-1:
A
B
B
A. Power
B. Output
C. Coil
D. Electrode
E. Safety ground
5.3 Sensor to transmitter wiring
Integral mount transmitters
Integral mount transmitters ordered with a sensor will be shipped assembled
and wired at the factory using an interconnecting cable. Use only the factory
supplied cable provided with the instrument. For replacement transmitters
use the existing interconnecting cable from the original assembly.
Replacement cables, if applicable, are available (see
10
Best practice conduit preparation
E
C
D
Rosemount 8732EM Transmitter with Modbus Protocol
November 2017
E
E
Figure 5-2).