Configuring Rmon Events; Verifying The Rmon Configuration; Default Rmon Settings - Cisco Nexus 3548 series Configuration Manual

Configuring RMON Events

On startup enable rising or falling alarm
Configuring RMON Events
You can configure RMON events to associate with RMON alarms. You can reuse the same event with multiple
RMON alarms.
Ensure you have configured an SNMP user and enabled SNMP notifications.
Before you begin
Ensure that you have configured an SNMP user and enabled SNMP notifications.
Procedure
Step 1
Step 2
Step 3
Step 4

Verifying the RMON Configuration

Use the following commands to verify the RMON configuration information:
Command
show rmon alarms
show rmon events
show rmon hcalarms
show rmon logs

Default RMON Settings

The following table lists the default settings for RMON parameters.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
112
Command or Action
switch# configure terminal
switch(config)# rmon event index [description
string] [log] [trap] [owner name]
(Optional) switch(config)# show rmon {alarms
| hcalarms}
(Optional) switch# copy running-config
startup-config
Purpose
Displays information about RMON alarms.
Displays information about RMON events.
Displays information about RMON hcalarms.
Displays information about RMON logs.
Purpose
Enters global configuration mode.
Configures an RMON event. The description
string and owner name can be any alphanumeric
string.
Displays information about RMON alarms or
high-capacity alarms.
Saves this configuration change.
Configuring RMON