Roberts Stream 218 Manual List page 13

by the Network Wizard. If no networks are found then you may have to get your
wireless router working (please see the instructions supplied with it) or you may be
too far from the router.
for the wireless access point on the screen. This is a name that is allocated to the
access point in your router by the person who set up the network - for example: 'Jones
family' or 'Paul's network'. Routers supplied by Internet Service Providers often have
the default name of the WiFi network provided on a label or card for easy reference
(e.g. BTHub-1234, virginmedia1234567). If the router supports WiFi Protected Setup,
then '[WPS]' will be shown in front of the SSID.
one wireless network, in which case you should choose which one you need to
connect to.
4. Rotate Tuning to see the SSID for each wireless network that has been found. If
your network is shown proceed to step 6 on the next page. If it is not shown then
proceed to step 5, also on the next page.
If you make a mistake at any point, use the Back button to go back to the previous
screen.
Network settings
Network wizard
Scanning...
SSID
Jones family
[WPS] Paul's network
Smith
Brown
[Rescan]
[Manual config]
12