Roberts Stream 218 Manual List page 67

to visit the help section on our web site.
of these steps may help to resolve the problem:
browse the web) using the same network.
2. Check that a DHCP server is available (normally a router function).
Your radio will by default use DHCP unless you choose to disable it.
settings' -> 'Network' -> 'Manual settings'
a wireless connection. You then need to choose 'DHCP enable' or
'DHCP disable'. If you enable DHCP then the radio will negotiate with
your router (or DHCP server) and will be provided with an IP address
as well as the other settings needed. If you wish to set the network
As a minimum, the radio needs access to UDP and TCP ports 80 and
123. Port 53 may be required for DNS. Some Internet radio services
may require additional ports to be open. Windows Media Player 12
addresses to have trusted access.
4. Check that your access point does not restrict connections to particular
You can view the radio's MAC address using the menu items 'Main
Menu' -> 'System settings' -> 'Network' -> 'View settings' -> 'MAC
address'.
The MAC address will typically be of the form
5. If you have an encrypted network, check that you have entered the
correct encryption key into the radio. Remember that text-format WPA
keys are case sensitive. If your radio displays 'Network error' when
attempting to connect to an encrypted network, then please ensure
that you enter the correct key for the network. If the problem persists,
'Main Menu' -> 'System
6. If you need to set up your radio's IP address manually, you will need
menu items 'Main Menu' -> 'System settings' -> 'Network' -> 'Manual
settings' -> 'Wireless' -> 'DHCP disable'.
The radio will then prompt you in turn for the
If you are setting up a wireless connection manually you will also need
to enter the SSID, the encryption type, and the encryption key.
See page 16 for full details on how to set up your radio's network
00:22:61:xx:xx:xx
IP address
Subnet mask
Gateway address
Primary DNS
Secondary DNS
Information
66