Roberts Stream 218 Manual List page 15

WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless routers
can also use pass-phrases for WEP but these are not supported by the radio. WPA
keys are usually set up using a pass-phrase of between 8 and 63 characters. Your
radio accepts pass-phrases for WPA keys.
9. To enter the WEP or WPA key, characters are selected and entered using the Tuning
control. As you rotate the control, the highlight scrolls through the available characters
as well as the three controls on the right. The character currently highlighted will be
entered when you press the Tuning control.
Do this as needed until the complete key has been entered. Remember, WEP keys
only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper and lower
case characters. You must enter the key exactly or the radio will not connect to the
network.
The three controls on the right-hand side of the screen have special functions. You
can quickly access these by pressing the Info button and then using the Tuning
control as needed:
select ' ' to erase a character just entered (long press to clear); Info
again to continue
select ' ' when the complete key has been entered
select ' ' to cancel and re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the
display will show 'Key: [Set]'. If you have previously entered a different key, you must
clear this by selecting the '
symbol and press the Tuning control. The screen will show 'Connecting...' and
then 'Setup wizard completed'. Press the Tuning control to the exit setup wizard.
The radio should now be able to connect to the network.
10. Once you have connected your radio to the network (and therefore also to the Internet)
it will display the Main mode menu. Press the On/Standby button to put the radio
into Standby mode. It should then display the time as obtained from the Internet.
If the time display is not correct for any reason, it can easily be adjusted later, see
page 55, 'Manually setting the clock'.
' symbol. This will remove the '[Set]' indication.
Key:
123- jones
0 1 2 3 4 5 6 7
8 9 . _ - @ ,
a b c d e f g h
i j k l m n o p
q r s t u v w x
Network settings
Please wait
Connecting...
Setup wizard
Setup wizard
completed
Press 'SELECT' to exit
14