Operational Failures; Error Messages; Reporting Errors; List Of Error Messages - Avery Dennison ALS 204 Operating Instructions Manual

C
ONTENTS
6.1 E
RROR MESSAGES
6
O
PE R AT IO N AL FA IL UR E S
6.1

ERROR MESSAGES

Reporting errors

6.1.1
When an error occurs, the machine stops immediately
and displays an error message on the control panel.
Error messages are displayed as follows:
Status num: 5144
Rewinder init20x 256
[52] An example of an error message:
5144 = status number; this number makes it easier to identify the
message.
'Rewinder init' = status text; a brief description of the error.

List of error messages

6.1.2
Status Status text
5000 Bus device
5001 No gap found
5002 Rewinder full
[53] List of error messages
Cause
2
– Device at I C Bus cannot be contact-
ed.
– In most cases, this message appears
as the first in a series of two or three
messages which narrow down the er-
ror more precisely.
– The maximum limit for missing labels
(LABEL SETUP > Miss. la-
was exceeded
bel tol.).
– The machine is not correctly set for
(MACHINE SETUP >
the type of label
Light sens. type
).
– Label length is not correctly set
(LABEL SETUP > Label distance).
– Photoelectric label sensor is dirty.
– Photoelectric label sensor is incor-
rectly positioned.
– Photoelectric label sensor is not con-
nected correctly.
– Photoelectric label sensor is defec-
tive.
– Rotary encoder is not adjusted cor-
rectly.
The (internal) roll diameter control has
calculated that the end of the material
roll has been reached.
50
Error messages that are not described here may only
be resolved by a qualified service technician.
When an error occurs that is not described here:
Press the button to delete the message.
Switch the device off, wait 30 seconds and then
switch it on again.
If the error reoccurs:
Request a service technician.
Error messages that are not mentioned here
are described in the service manual.
Action to take
Delete the message by pressing the
-key.
Switch the machine off, wait 30 sec-
onds and switch it back on.
If the error message
peatedly, call in a servicing tech-
nician.
Check the points listed above and
correct if necessary.
Press the
ror message.
Insert new label roll.
ALS
20x
256
GB
appears re-
key to confirm the er-