CalAmp Dataradio Sentry 4G 900 User Manual page 26

When these settings are complete, the PC will have network access.
5.4.1.5 Static IP Setup
If your network requires each PC to have a statically set LAN IP addresses, follow the
previous procedure for all PCs on the network. If the network requires a mix of static and
dynamically assigned IP addresses, assign static IPs outside the DHCP address range for PCs
that require static IP addresses and allow the Sentry 4G router DHCP to assign the remaining
PC IP addresses.
Statistics
5.4.2
This tab displays information regarding the number of packets and bytes transmitted and
received over the ETH0 or ETH1 interface.
5.5 WiFi (WLAN)
A Sentry 4G unit can operate in an access point mode and in a client mode.
In access point mode, the Sentry 4G router offers wireless tether. It forwards local WiFi
traffic to application servers over the broadband 802.16-2005 network and works in parallel
with Ethernet connection, providing for simultaneous WiFi and Ethernet connections (see
Figure 13A).
In client mode the Sentry 4G unit can automatically switch between broadband 802.16-2005
and WiFi connections providing for seamless handover when coupled with modern
applications (see Figure 13B).
Figure 13 - Sentry 4G WiFi Modes: Access Point (A); Client Mode (B)
001-9193-001 Version 1 Page 26 of 48
CONFIGURATION
TM
Sentry 4G 900 User Manual