CalAmp Dataradio Sentry 4G 900 User Manual page 21

Status
5.3.2
The Status tab of the WWAN page displays the current WWAN interface status including firmware
version, link status, and link information. Information on this page is read-only.
Settings
5.3.3
The Sentry4G router uses EAP-TTLS (Extensible Authentication Protocol-Tunneled Transport Layer
Security) to obtain authorization and traffic key material from the BTS. The EAP-TTLS is disabled by
default.
To enable EAP-TTLS authentication:
Under "Authentication" select "EAP-TTLS" from the Protocol drop-down box
Under "EAP-TTLS" fill in the User Name and Password fields and click "Save"
Click "Browse" to locate certificate file supplied by the backhaul provider and click "Save"
Contact your backhaul provider for more information.
001-9193-001 Version 1
Figure 9 - Sentry 4G Router WWAN Main
Figure 10 - Sentry 4G Router WWAN Status
Page 21 of 48
CONFIGURATION
Sentry 4G 900 TM User Manual