Other Settings - KoamTac KDC20 User Manual


Erase the
 Set Partial Data Start Position to
Action to Erase
 Partial Data Length
5.5

Other Settings

Other options under the Settings menu allow you to select four additional settings.
Ask Confirmation before Trying Auto Connection prevents unintentional launch

of KTSync.
Ask Confirmation before Starting Auto Synchronization prevents unintentional

synchronization of data.
Minimize KTSync on Start will minimize KTSync and send to the tray upon

execution.
Keep Checking

Bluetooth
signal is detected. This feature is useful when moving from
host device frequently. KTSync will automatically reconnect
connection when you enter an effective
To select any of these settings, click on the box to the left of the setting. A check mark ()
will display next to the setting to indicate that it is selected.
x y
characters from position
0
means Erase all characters from
Bluetooth
Connection allows reconnection of KDC once
®
Figure 24 - KTSync Confirmation Settings
y , Partial Data Length to
Bluetooth
network range.
68
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
KDC User Manual
x, Partial Data
y
position.
Bluetooth
Bluetooth