Koamtac Installation Wizard - KoamTac KDC20 User Manual

2.2

KoamTac Installation Wizard

2.2.1 Windows 7 and 8
WARNING: DO NOT CONNECT KDC TO USB PORT PRIOR TO INSTALLATION
Insert KoamTac Installation CD into your computer's CD drive.
1.
Click Start icon then My Computer icon. A listing of devices on your
2.
computer will be displayed including the disk drive containing the KoamTac
Installation CD.
Click on the KoamTac Installation CD icon then click on the Setup directory.
3.
Click on the PC_Setup.exe file which executes the KTSync Setup Wizard.
Note:

If KTSync Setup Wizard locates an older version of KTSync on your
computer, you will be prompted to remove the older program before
installing the new version. Select Remove KTSync then click Finish. When
removal is complete, click Close. Go to Step 2 to run KTSync Setup Wizard.

If you have any problems, please refer to
KTSync Setup Wizard
Follow the steps to install KTSync as images below.
Click Next icon in KTSync Setup Wizard window

2.3 Manual Installation.
21
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
KDC User Manual