Regulatory Compliance - KoamTac KDC20 User Manual

Regulatory Compliance

FCC ID: VH9KDC20
This equipment has been tested and found to comply with the limit of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation; if this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user, is encouraged to try to correct the interference by one or more
of the following measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
WARNING:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Products intended for sale within the European Union are marked with a CE Mark which
indicates compliance to applicable Directives and European Normes (EN), as follows.
Amendments to these Directives or ENs are included: Normes (EN), as follows:
Applicable Directives:
11
Revision 3.05.R6
Copyright ® 2014, KoamTac, Inc.
KDC User Manual