Module - Hitachi HVM Navigator V03-06 User Manual

Detailed error information detected by Migration Management
Server thread module
Format
"EMG" op1 : don't_care : don't_care : (op3) : "MMS Thread" : message
•
"EMG": Fixed characters meaning error message.
•
"MMS Thread": Fixed characters meaning Migration Management Server
thread module that executes migration.
•
don't_care: Values at this position are negligible.
•
op1: 1st operand that identifies error detail in hexadecimal code. See
Description.
•
op3: 3rd operand that identifies reason in hexadecimal code. See
Description.
•
Message: Error detail in text. See Description.
Table 6-3 Error message detected by MMS Thread
op1
0x00 00000004 F00d 03
0x00 ******** F003 03
0x00 ******** F009 03
0x00 ******** F00a 03
0x00 ******** F00b 03
0x00 ******** F0a0 03
0x00 ******** 0008 03 ffffffff
op3 Message [interpretation]
0x01 The specified Migration Path collides with
the Management Path Settings.
0x101 The specified LPAR is busy, please wait
until another migration is completed.
0x01 The MMS could not accept a migration with
activated LPAR. Please shutdown the
specified LPAR, and try again.
0x01 Connection refused (MMS-Blade)
[Migration terminated by a network
failure.]
0x01 There is not enough memory to activate
the specified LPAR.
0x01 The specified LPAR is deactivated. Can not
execute LPAR migration.
Internal error: The MMS thread could not
activate the destination LPAR. (The MMS
fffffffe
thread could not allocate enough resource
fffffffd
to activate)
[Failure in rebooting when 3rd operand is
"ffffffff" or "fffffffe"; failure in saving
configuration information when 3rd
operand is "fffffffd."]
Troubleshooting
HVM Navigator User's Guide - Migration
Suggested action
Configure a different network from
the one for the management path.
Wait until the ongoing migration is
complete and then retry migration.
Deactivate the specified LPAR and
retry migration.
Check for recovery of connection and
then retry migration.
Reserve enough amount of free
memory to activate the specified
LPAR and then retry migration.
Activate a migrated LPAR and retry.
Reserve enough amount of resources
to activate the specified LPAR and
then retry migration.
6-39