Hitachi HVM Navigator V03-06 User Manual page 125

Fig. 3-38
Check the application requirements
for Concurrent Maintenance mode.
(Migration Config Viewer window)
Are there no error?
Execute LPAR migration in Shutdown
(Migration [Shutdown] window)
Check LPAR migration in progress.
(Migration Progress window)
Check LPAR migration completion.
(Migration Progress window)
Are there LPARs which
need to be recovered?
Are there LPARs with
WWNs which need to be
rolled back?
Check if there are no errors.
(HVM Console window)
Reconfigure a clustering
configuration with the destination
server blade
The migrated LPAR is running.
Figure 3-4 Operation flow for Concurrent Maintenance mode
For the procedure of recovering LPARs, see the 1st figure in a subsection
"Recovering LPAR" in this section. Whereas, for the procedure of rolling back
WWNs, see the 1st figure in another subsection "Rolling back WWNs" in the
section.
HVM Navigator User's Guide - Migration
Yes
mode.
Yes
Yes
Migration procedures
No
Take measures for errors.
No
Recover LPARs.
(See Recovering flow.)
No
Roll back WWNs.
(See Rolling back flow.)
3-29