•
You can restore an HVM configuration through an SC/BSM, the web
console for CB500, or the web console for CB2500. When you restore HVM
configuration, don't restore only either one on the source or destination
server blade. It may cause MAC address to be duplicated. So, absolutely
restore HVM configurations on the source and destination server blades
together.
•
You can find out that restoring HVM configurations have succeeded by
checking the following conditions are fulfilled.
There is an LPAR which has failed to be recovered on the source HVM.
–
The configurations on the above LPAR and the source HVM are the
–
same as the previous backed up configuration.
There isn't an LPAR which has failed to be recovered on the source
–
HVM.
The configuration on the destination HVM is the same as the previous
–
backed up configuration.
HVM Navigator User's Guide - Migration
Migration procedures
3-79