Detailed Error Information Detected By Migration Management Client - Hitachi HVM Navigator V03-06 User Manual

Detailed error information detected by Migration Management
Client
Format
"EMG" op1 : don't_care : don't_care : (don't_care) : "MMC" : message
•
"EMG": Fixed characters meaning error message.
•
"MMC": Fixed characters meaning Migration Management Client.
•
don't_care: Values at this position are negligible.
•
op1: 1st operand that identifies error detail in hexadecimal code. See
Description.
•
Message: Error detail in text. See Description.
Table 6-1 Error message detected by MMC
op1
0x00 00000000 0001 01
0x00 00000000 0003 01
0x00 00000000 0004 01
0x00 00000000 0005 01 The specified blade is not found.
0x00 00000000 0006 01 The version isn't matched
6-32
Message [interpretation]
Connection refused (MMC-MMS)
[Migration Console module (MMC)
cannot connect to Migration
Management module (MMS).]
between MMC and MMS.
Troubleshooting
HVM Navigator User's Guide - Migration
Suggested action
In the "Option" window opened from the "Main"
window, check the following, make corrections if
necessary, and then retry migration:
The communication between management server (HVM
Navigator) and the specified server blade is normal.
Select Migration Service in the left pane, and see if
Migration Service Status in right pane is "Run."
Migration Service Port in the same pane is usable.
Check the following, make corrections if necessary, and
then retry migration:
The specified server blade is present.
The specified server blade is up and running.
Communication to the IP address of the specified
server blade is established.
Install HVM Navigator again.