Scheduling Mode Of Assigned Usb Is Exclusive Shared - Hitachi HVM Navigator V03-06 User Manual

Scheduling mode of assigned USB is exclusive shared

•
When you have an LPAR migrate in Shutdown mode
– HVM firmware version 17-71 or earlier on source server blade
When an LPAR on HVM firmware version 17-71 or earlier migrates, the
USB device of PCI Device #1 is assigned on destination server blade,
that is, the status of USB device of PCI Device #1 becomes "A
(assigned)" regardless of assigned state of the USB on the source
server blade.
– HVM firmware version 59-00 or higher, 79-00 or higher, 17-82 or
higher, 01-00 or higher, or 02-01 or higher on source server blade
When an LPAR, which the state of USB is set to "#R (running)" or "#A
(assigned)", on HVM firmware version 59-00 or higher, 79-00 or higher,
17-82 or higher, 01-00 or higher, or 02-01 or higher migrates in
Shutdown mode, "#" is not transferred. For the state on the destination
HVM depending on HVM firmware version and the state on the source
serer blade and the LPAR status on the destination server blade, see the
following table.
Table 5-4 Assigned state of USB on destination HVM
CB2000
5-14
HVM firmware version
Standard 58-83 or
Server Blade earlier
59-00 or
higher
High 78-83 or
Performance earlier
Server Blade
79-00 or
higher
Usage notes
HVM Navigator User's Guide - Migration
Assigned state on destination
Assigned
state on
LPAR is
source
deactivated
* *
A (assigned) A (assigned)
R (running) A (assigned)
* *
#A (assigned) A (assigned)
#R (running) A (assigned)
* *
A (assigned) A (assigned)
R (running) A (assigned)
* *
#A (assigned) A (assigned)
#R (running) A (assigned)
LPAR is
activated
*
A (assigned)
*
/R
A (assigned)
*
/R
*
A (assigned)
/R (running) *
A (assigned)
*
/R (running)
*
A (assigned)
*
/R (running)
A (assigned)
*
/R (running)
*
A (assigned)
*
/R (running)
A (assigned)
*
/R (running)