6: Noise Control
Table 6-5: Annual acoustical materials inspection
At least annually inspect all acoustical materials, if any, for security of attachment. Make sure that there is not any material
missing or damaged (refer to Parts List). Clean or replace, if necessary. Do not operate compressor with defective acoustical
material. Remove and replace defective parts by ordering with part numbers indicated in the Parts List.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Table 6-6: Annual inspections for proper operation of all systems
In addition to other instructions in the Operator's Manual, at least annually, operate compressor and inspect to make sure all
systems are operating properly and that engine runs at rated speed and pressure. Do not operate malfunctioning or
improperly adjusted compressor. Repair or adjust, per instructions in Operator's Manual, as required.
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
Maintenance performed:
By:
Location:
Date:
52
02250223-054 R01
Subject to EAR, ECCN EAR99 and related export control restrictions.
185 T3 Kubota User Manual