Compressor Fluid Filter Element Replacement - Sullair 185Tier 3 Kubota User Manual

185 T3 Kubota User Manual
5.9.2 Compressor fluid filter element
replacement
1. Fluid filter
2. Compressor unit
3. Thermal valve manifold
1
Fluid filter replacement P/N: 02250209-729
Figure 5-1: Fluid filter
Refer to Figure 5-1.
1. Remove the old element with a strap
wrench.
2. Clean the gasket seating surface.
3. Apply a light coating of fluid to the new gas-
ket.
4. Hand tighten the new element until the new
gasket is seated.
5. Continue tightening the element by hand an
additional ½ to ¾ turn.
6. Restart the compressor and check for leaks.
1
Subject to EAR, ECCN EAR99 and related export control restrictions.
5.9.3 Air filter maintenance
1. Filter body
2. Filter cover
3. Primary element
4. Safety element (optional)
1
Replacement primary element P/N: 02250102-158
2
Replacement safety element P/N: 02250102-160
Refer to Figure 5-2. Air filter maintenance should be per-
formed as often as conditions require. If the filters are
equipped with optional maintenance indicators, change the
filters every time the indicators show a change is necessary.
5.9.3.1 Air filter replacement
1. Loosen and remove the air filter and cover.
2. Remove the primary and optional secondary
elements.
3. Clean the body, inside and out, with a damp
cloth.
4. Reinstall (if clean) or replace the secondary
element if installed.
5. Replace the new primary filter element.
6. Reposition the cover and lock it into the position.
7. Reset the filter restriction indicator (if
equipped).
02250223-054 R01
5: Maintenance
1
2
Figure 5-2: Air filter
41