Begin Page (Bp); End; End Page (Ep); Load Copy Control (Lcc) - Printronix T5000R Series Programmer's Reference Manual

Chapter 2
The IPDS Emulation

Begin Page (BP)

This command indicates the beginning of a page and causes the printer to
enter the page state.

End

This command notes the end of a block containing: an image, graphics, or bar
codes.

End Page (EP)

This command notes the end of a page, a page segment, or an overlay and
returns the printer to the home state.

Load Copy Control (LCC)

This command is effective only in the home state and controls the number of
times you want to print the current logical page.

Load Font Equivalence (LFE)

This command is used to re-identify local font data IDs to host specified font
resource IDs.

Load Page Descriptor (LPD)

The LPD command sets the logical page's characteristics, such as the units
for positioning text, the margins, and line spacing, etc.

Load Page Position (LPP)

The LPP command sets the position of the logical page on the physical page,
which allows for any required offsetting.
22
Byte D6AF Flag
Count
Byte D65D Flag
Count
Byte D6BF Flag
Count
Byte D69F Flag
Count
Byte D63F Flag
Count
Byte D6CF Flag
Count
Byte D66D Flag
Count
CID Data
CID Binary Data
CID Binary Data
CID Data
CID Data
CID Data
CID Data