Printronix T5000R Series Programmer's Reference Manual page 79

X'029701' Overlay Nesting Limit Exceeded
Explanation: Depth of overlay nesting is greater than the maximum depth.
Alternate Exception Action: None.
X'029801' Suppression Number Outside Valid Range
Explanation:
1. On a Write Text command, the Begin Suppression number value is not a
valid or supported value.
2. In a LCC command, the suppression number value is not a valid or
supported value.
Alternate Exception Action:
1. Ignore the control sequence.
2. None.
X'029803' Temporary Baseline Move Error
Explanation:
1. The temporary baseline increment is not a valid or supported value.
2. The temporary baseline move direction is not a valid or supported value.
3. The temporary baseline move precision is not a valid or supported value.
4. Unsupported multiple offset temporary baseline move.
5. Unable to support temporary baseline move by printing full size
characters.
Alternate Exception Action:
1. None for reasons 1 through 4.
2. For reason 5, present according to the substitution method.
X'02AC01' Insufficient Storage to Print the Sheet
Explanation: Page is too large for main storage.
Alternate Exception Action: None.
Specification Check-General — X'02'
77