Specification Check-Graphics - X'03 - Printronix T5000R Series Programmer's Reference Manual

X'040F0C'
Explanation:
Invalid Macro PDF417 Control Block length value.
Alternate Exception Action: Terminate bar code object processing.
X'040F0D'
Explanation:
Invalid data within a Macro PDF417 Control Block.
Alternate Exception Action: Present the bar code symbol without a Macro
PDF417 Control Block.
Specification Check-Graphics — X'03'
The following exception codes are the valid codes for a graphics specification
check condition:
X'030001' Unallocated Graphic Order or Command Code
Explanation:
1. An attempt was made to execute an unallocated order code that is
reserved for future use.
2. An attempt was made to execute an unallocated command code that is
reserved for future use.
Alternate Exception Action: None.
X'030002' Reserved Byte Error or Invalid Default
Explanation:
1. A reserved byte in the graphic order is not set to zero.
2. The Set Current Defaults instruction attempts, in byte 2, to set an invalid
or unsupported attribute.
3. An invalid default byte value was received in the GDD.
Alternate Exception Action: None.
Specification Check-Graphics — X'03'
55