The Text Commands; Load Equivalence (Le); Write Text (Wt) - Printronix T5000R Series Programmer's Reference Manual

The Text Commands

The following commands are used to present text blocks in a page, a page
segment, or an overlay.

Load Equivalence (LE)

Byte
Count
This command allows the printer to use a single suppression ID for more than
one suppression pair.

Write Text (WT)

Byte
Count
Use this command to send character data and controls to the printer. The
data and controls can begin in one Write Text command chain and end in
another Write Text command chain.
Controls are listed on the following pages. The first control is preceded by the
escape sequence 2B D3. Subsequent controls will follow as long as the
preceding code is a chained code.
D61D Flag
D62D Flag
The Text Commands
CID Data
CID Presentation
Text Object;
Content
Architecture
control codes
and character
data
13