Specification Check-General - X'02 - Printronix T5000R Series Programmer's Reference Manual

Ipds emulation

Hide thumbs Also See for T5000R Series:

Table of Contents

X'03D104' Image Height Greater Than Maximum Supported

Explanation: The Height value specified in the Begin Image order exceeds

the maximum image height supported by the product.

Alternate Exception Action: The image height is truncated at the maximum

height supported.

X'03E100' Relative Line Outside Coordinate Space

Explanation: The relative line starts inside the drawing order coordinate

space but goes outside.

Alternate Exception Action: None.

Specification Check-General — X'02'

The following exception codes are the valid codes for a general specification

check condition:

X'020001' Embedded Text Control Code Error

Explanation: Undefined text control code.

Alternate Exception Action: Ignore the control sequence.

X'020201' End Suppression Text Control Error

Explanation: The active Begin Suppression ID within the current page,

overlay, or page segment is not the same as that specified in the ES control.

There is no active suppression ID.

Alternate Exception Action: None.

X'020202' Invalid IPDS Command Length\

Explanation: The length for a command is not within the allowed range.

The length of a Request Resource List entry is not a valid or supported value.

The length specified for a Request Resource List entry does not match the

number of bytes received.

Alternate Exception Action: None.

Specification Check-General — X'02'

Table of Contents

Sl5000r series