Printronix L5535 Operator's Manual page 101

10. Lower the transport surface by turning on the green lever on
the transport unit to the left.
Legend:
1) Transport Unit
2) Green Lever
11. Pull the transport unit toward you until it stops.
12. Using a vacuum, clean the toner, paper dust, etc. Be sure to
clean under the transport unit as well.
13. Wipe off the dirt on the transport surface with wet tissue paper.
14. Using an ammonia-based wax-free cleaner or rubbing alcohol,
clean the belts to remove residue buildup and restore their
tacky surface.
15. Push the transport unit into the printer while holding down the
green lever. When the transport unit is in position, raise the
green lever to the right to raise the transport surface.
Vacuuming The Printer
1
2
101