Printronix L5535 Operator's Manual page 66

Chapter 3
Consumables Replacement
15. Carefully pull the old drum out along the drum auxiliary rod.
Hold the ends when the drum is nearly out of the printer, and
remove it with both hands.
16. Pack the old drum for shipment using the original packaging
material, and close the cover of the box.
17. Wipe the drum shaft clean with a cloth.
CAUTION
Avoid touching the surface of the drum with your hands; it
reduces the life of the drum.
18. Remove the new photoreceptor drum from its package. Do not
discard the packaging material, as it will be needed for future
drum disposal.
NOTE: The ends of the drum are identical; there are no front or
66
Legend:
1) Drum
back ends. Wipe inside the endcaps of the drum with a
cloth to ensure that they are clean.
1