Printronix L5535 Operator's Manual page 127

23. Wipe the SELFOC
page 78) from the inner part of the printer toward you. Wipe the
lens several times until there is no more dirt on the cloth.
CAUTION
When wiping the SELFOC lens, be certain not to apply
excessive force to the drum surface potential sensor near the
SELFOC lens, as this may dislocate the sensor. (If this
happens, contact your service representative.)
NOTE: Always wipe the SELFOC lens with the unused side of the
Toraysee.
Legend:
24. Install the main charger.
25. Install the cleaning unit.
26. Install the photoreceptor drum. (Refer to page 60.)
27. Install the developing unit. (Refer to page 75.)
®
lens by moving a Toraysee cloth (listed on
1
1) SELFOC Lens
2) Drum Surface Potential Sensor
Cleaning The Developing Area
2
127