Clear Key; Test Key; Shift Key; Page Eject Key - Printronix L5535 Operator's Manual

Chapter 2
Using The Control Pane l
NOTE: When the printer is not in an error state, pressing ONLINE

CLEAR Key

•
In the fault state, press the CLEAR key to clear errors and reset
the printer to the offline state (if all errors are cleared).
•
To start downloading printer operating system files to the
printer, hold down the ONLINE + CLEAR keys while cycling
printer power. See Chapter 3 for more information.

TEST Key

When the printer is offline, you can run a test print, as configured
under the Test Print menu (page 96), by pressing the TEST key. To
stop the test print, press TEST again.
Pressing TEST when the printer is online has no effect.

SHIFT Key

This key does not have a function of its own. It is combined with
other keys to modify their functions.

PAGE EJECT Key

The PAGE EJECT key performs the following functions when the
printer is online:
When the JOB IN PROCESS status indicator lights steadily,
pressing PAGE EJECT causes the printer to print all data in the
printer. The page is then cut at the perforation (unless the Burst On
Eject option is disabled).
When the JOB IN PROCESS status indicator flashes, pressing
PAGE EJECT causes the printer to attempt to print any data in the
buffer. The paper motion caused by the page eject operation may
interrupt the printing of data that is not currently in the buffer.
48
in any level of the configuration menu causes the printer to
accept any configuration changes you have entered and
return to online status. When the printer is in an error state,
pressing ONLINE in any level of the configuration menu
causes the printer to re-display the fault message.