Network Name; Speed Type - Printronix Integrated Network Interface Card User Manual

Network Name

Enter the wireless network name. Maximum length of 32
characters.
Mode
Set the mode of operation for the wireless device. Pseudo, Adhoc,
and Managed are the available settings.
NOTE: Mode is not applicable for 802.11g/b.

Speed Type

Change the selected bit-rates. Choosing "auto" will select auto
settings even if some or all of the checkboxes are selected. To
manually choose bit-rates, change speed option to "user" and
check the appropriate checkboxes. If "user" is selected, and no
checkboxes are checked, then the automatic setting is used.
Speed
Checkmark the appropriate checkboxes to manually choose the bit-
rates.
NOTE: The Speed Type must be set to "user". If "user" is selected,
and no checkboxes are checked, then the automatic
setting is used.
Channel
This is the frequency used for wireless communication. The
2.4GHz band spectrum is divided into different channels (1-15). It is
set to "Default" so that the NIC can detect the correct channel to
communicate with the Access Point in infrastructure mode. If the
operation mode is "Ad Hoc" and the channel is known, the user can
set the corresponding channel in this menu.
NOTE: Channel is not applicable for 802.11g/b.
Wireless
49