Nic Configuration For Aix 4 - Printronix Integrated Network Interface Card User Manual

Chapter 5
Solaris 2.6 – 7 NIC Setup

NIC Configuration for AIX 4

Before you set up the printer, it is good to know the ways a print job
can be filtered.
1. Standard processing. Filtering is done on the printer with no
processing on the host.
2. Local Filtering. Filtering is done on the host. Be sure to specify
the printer model during install.
Standard Processing
1. Enter SMIT select devices.
2. Select Printer/Plotter.
3. Select Print Spooling.
4. Add a Remote Print Queue.
5. Set the type of Remote Printing to Standard processing.
6. Enter the following Remote printer settings:
Name of queue
Host Name of Remote Server
Name of Queue on Remote
Server
Type of Print Spooler
120
any_name, user selectable
name in /etc/hosts file or the
NIC IP address
d1prn
BSD (Press the list button and
choose BSD)