Printronix Integrated Network Interface Card User Manual page 101

Figure 33. Specifying Port Settings
12. Complete the Port Settings tab as desired:
•
Raw. (The default.) Make sure "Raw" is selected in the
"Protocol" field. Leave the setting at 9100 (the default) in
the "Raw Settings Port Number" field.
•
LPR. To select the LPR setting, click LPR in the "Protocol"
field. In lowercase characters, type the desired queue
name of d1prn through d8prn in the "LPR Settings Queue
Name" field.
•
SNMP Status Enabled. Check the SNMP Status Enabled
box if you want the status returned using SNMP. You must
also enter the appropriate information in the "Community
Name" and "SNMP Device Index" fields.
Upon completion, click OK.
Windows Vista Setup
97