As/400 Configuration, Ascii Printer; Overview - Printronix Integrated Network Interface Card User Manual

7

Overview

This chapter details a complete AS/400 configuration setup
including:
•
•
•
•
This document assumes no AS/400 printer configuration has been
done. If any configuration has been done, please follow the
procedure to the point at which continued configuration is required.
Developing Line Descriptions With CRTLINETH
For each LAN adapter on the AS/400, a line description needs to be
created for the NIC. This is required for Release V3R2 and V3R7.
If a line description already exists, make sure the SSAP list
includes default options "AA" and "12." You must also know the
LAN speed for the AS/400 LAN adapter.
NOTE: To change a line description, you need to vary the line off
To change an existing line description, use the CHGLINETH
command. To create a line description, use CRTLINETH.
AS/400 Configuration,
ASCII Printer
Developing Line Descriptions with CRTLINETH
Configuring the AS/400 for TCP/IP
Configuring the AS/400 for Printing
Verifying Printing from the AS/400
before making the change. After making the change, you
need to vary the line back on.
143