Printronix Integrated Network Interface Card User Manual page 206

Chapter 9
Configuration Screens
The following displays:
Mode: TN5250
Host
Port
Device Description
Message Queue Name
Message Queue Library
Device Type
WSCST Name
WSCST Library
Auto Connect
Start Auto Connect
3. Select TN3270E Mode.
The following displays:
Configuration for Print Path d2prn
Mode: TN3270
Host
host.domain.com)
Port
Resource Name
Auto Connect
Stop Auto Connect
NOTE: Changes will only take effect after you reset the line matrix
4. Enter the address of your system for the host IP address
The port address is the port configured for your telnet server. It is
usualy port 23.
The Resource name will be the printer name defined in the VTAM
portion of your Telnet server configuration. For this example use
RMT3.
202
Click here for TN3270 mode
ok (eg. 204.191.175.114 or
host.domain.com)
GENERIC PRINTER
Click here
Click here for TN5250 mode
ok (eg. 204.191.175.114 or
23
Click here
printer from the System page.