Printronix Integrated Network Interface Card User Manual page 240

Chapter 12
Complete Command List
set dest <DEST> service [[-]socket][[-]lpd]
[[-]lpsched] [[-]rprinter] [[-]pserver] [[-]netbios]
[[-]ftpd] [[-]tn]
Example: set dest d1prn service -netbios
Set the destination (<dest>) to handle only certain print
services. To add a service, specify the service name. To
disable a service, use "
services are described in the following table.
Services
socket
lpd
lpsched
netbios
ftpd
tn
set dest from default
Set all destination settings back to factory defaults.
set dest from stored
Set all current destination settings to the values stored in flash
memory.
set ifc
Example: set ifc <IFNUM> up|down
Set state of the specified network physical interface up or
down. <ifnum> is the interface number for the NIC device.
236
" before the name. The available
-
Direct socket printing via TCP/IP.
LPR printing with TCP/IP, including LPR clients
on any platform.
LP or System V printing with TCP/IP.
Windows 95 and Windows for Workgroups
printing.
Printing using the File Transfer Protocol (FTP)
via TCP/IP.
Printing using the TN5250/3270 session.