5. Select auto connect.
6. Go to the system page and reboot for the changes to take
effect.
7. After the printer reboots, enter the command /DTCPIP, T,
CONN from the SDSF console. The following messages show
that the printer is connected.
D TCPIP,,T,CONN
EZZ6064I TELNET CONNECTION DISPLAY 044
EN
CONN
TY IPADDR..PORT
-------- -- ---------------------- -------- -------- --- --------
00000468
9.99.98.62..2000
----- PORT:
23
ACTIVE
------------------------------------------------------------
3 OF 3 RECORDS DISPLAYED
You are now ready to print.
Printer Inventory Manager As Defined With TN3270E
TSP
LUNAME APPLID PTR LOGMODE
RMT3
*PRINTER PPE LU3PRT
PROF: CURR CONNS:
Configuration Screens
1
203