Printronix Integrated Network Interface Card User Manual page 243

set model <MODEL> stty [[-]onlcr] [[-]descramble]
[xtab <1-16>|none]
Example: set model m3 stty onlcr
Control extra job processing done by the <model>. The
processing options are:
onlcr Carriage return insertion for Unix text jobs.
Adds carriage returns to text jobs with solitary
linefeeds. This will prevent stair-stepped
output or output running off the right side of
the page.
descramble Automatic descrambling of print jobs passing
through which have been scrambled using
Printronix proprietary Unix scramble utility,
npscramble.
xtab Tab expansion from 1 to 16 spaces.
set model <MODEL> header [<STRING>]
Example: set model m1 header 0x20
Set a header string to be sent to the printer at the start of any
print jobs passing through this <model> . The headerstring
(<string>) can consist of up to nine elements. An example
element is a hexadecimal code (e.g., 0x04) or a pre-defined
variable on the print server (e.g., $FF for a formfeed). Use
list var to see all available variables. To erase the header,
send the command with no headerstring value; for example 'set
model m1 header'.
set model <MODEL> trailer [<STRING>]
Example: set model m7 trailer $FF
Set a trailer string to be sent to the printer at the end of any
print jobs passing through this <model> . The trailerstring
(<string>) can consist of up to nine elements. An example
element is a hexadecimal code (e.g., 0x04) or a pre-defined
variable on the print server (e.g., $FF for a formfeed). Use
list var to see all available variables. To erase the trailer,
send the command with no trailerstring value; for example 'set
model m1 trailer'.
Set Commands
239