Program Materials - Printronix Integrated Network Interface Card User Manual

Chapter 9

Program Materials

Program Materials
A program is identified by a program number and a feature number.
The program number for Coax Printer Support is 5697-F51.
Additional information regarding the telnet server and Info Print
Server can be found in the following manuals.
•
For z/OS V1R2 and above, the TCPIP information can be
found in SG24-5227-3, Communications Server for z/OS V1R2
TCP/IP Implementation Guide.
•
InfoPrint Server Customization Guide, S544-5744-03.
•
InfoPrint ServerOperation and Administration, S544-5745-03.
1. Look at the JES definition defining and associating printer,
PRINTER9 with INFOPRINT SERVER.
/* PRT9 AND FSSDEF FOR LINE MATRX 06/27/97 MM
PRINTER9 CLASS=K,SEP,NOMARK,MODE=FSS,FSS=PRINTWAY,
PRMODE=(LINE,PAGE),WS=(W,Q),SETUP=NOHALT,START=NO
/* ASSOCIATE PRINTWAY WITH ITS START UP PROCEADURE
FSS(PRINTWAY) PROC=COURWTR,AUTOSTOP=YES
Figure 47. JES Definition Defining PRINTER9
//COURWTR PROC
//* -------------------------------------------------------------*
//IEFPROC EXEC PGM=ANFFIEP,REGION=3M,PARM='INV=AOP1' z/OS4 INV
//STEPLIB DD DSN=IPPW.PW311.SANFLOAD,DISP=SHR
//ANFQUEUE DD DSN=ANDREE.z/OS4.QUEUE,DISP=SHR
//ANFMMSG DD DSN=ANDREE.z/OS4.MSGFILE,DISP=SHR
//SYSPRINT DD SYSOUT=*
//SYSABEND DD SYSOUT=*
//SYSUDUMP DD SYSOUT=*
//
Figure 48. Example Of Proc Used To Start INFOPRINT Server
188
*/
X
*/