Printronix Integrated Network Interface Card User Manual page 154

Chapter 7
Configuring The AS/400 For Printing
Destination Type (DESTTYP)
Specify *OTHER for the DESTTYP parameter.
Transform (TRANSFORM)
Specify *YES.
Manufacturer Type and Model (MFRTYPMDL)
Select a manufacturer type and model. This is the name of the
WSCO. Select *IBM6400EP for Epson emulation or *IBM6400 or
*IBM42023 for Proprinter Emulation if you have AS/400 V3R2 and
above or V3R7 and above.
NOTE: Select the Manufacturer Type Model based on the data
a. Report printing, text only, no IGP or barcodes.
b. PGL or VGL or PPI program.
150
type.
Manufacturer Type Model
Workstation customizing object = *NONE
Since IBM42023 is a Printronix XL emulation, the printer
emulation must also be switched to Proprinter emulation.
Be sure to save the printer emulation as the power-up
configuration.
Alternate selection:
Manufacturer Type Model
Workstation Customizing Object = *NONE
Since IBM6400EP is an Epson emulation, the printer
emulation must be also switched to Epson emulation. Be
sure to save the printer emulation as the power-up
configuration.
Manufacturer Type Model
Workstation Customizing Object = QWPDEFAULT
Library
= *IBM42023
= *IBM6400EP
= *WSCSTCONT132
= QSYS