Wiring Plan - Vega VEGABAR 17 Operating Instructions Manual

5 Connecting to power supply
Angled plug connector
according to ISO 4400
Round plug connector
M12 x 1
16
Snap the plug insert into the plug housing and insert the sensor
8
seal
Information:
Note the correct arrangement, see illustration
Tighten the screws on the strain relief and cable entry
9
10 Hook in the cover and push onto the plug connection, tighten
cover screw
11 Plug the plug insert with seal to VEGABAR 17 and tighten the
screw
The electrical connection is finished.

5.3 Wiring plan

Fig. 7: Wiring plan, angle plug connector according to ISO 4400, top view to
VEGABAR 17
Voltage supply and signal output
1
Fig. 8: Wiring plan, round plug connector M12 x 1, top view to VEGABAR 17
Voltage supply and signal output
1
Connection via connection cable with 4-pole socket M12 x 1
(accessory)
1
3
2
2 1
3 4
3
+
1
-
+
1
-
VEGABAR 17