ACME XP-1200F User Manual page 3

XP-1200F
3. Try to use another DMX controller.
4. Check in the DMX cables run near or run alongside to high voltage cables that may
cause damage or interference to DMX interface circuit.
C. One of the channels is not working well
1. The stepper motor might be damaged or the cable connected to the PCB is broken.
2. The motor's drive IC on the PCB might be out of condition.
D. The lamp is cutting out intermittently
1. The lamp is not working well. Check the main voltage either too high or too low.
2. Internal temperature may be too high. Check and if necessary replace the fan.
9. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater
accumulation of dirt on the unit's optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days.
17-
CONTENTS
1. Safety Instruction...................................................................................... 3
2. Installation ................................................................................................. 5
3. Technical Specification ............................................................................ 6
4. Control Panel............................................................................................. 7
5. Lamp .......................................................................................................... 8
6. How To Set The Unit ................................................................................. 9
6.1 Main Function ...................................................................................... 9
6.2 Home Position Adjust .........................................................................11
7. How To Control The Unit ........................................................................ 12
7.1 DMX512 Connection ......................................................................... 12
7.2 Dedicated Controller .......................................................................... 13
7.3 DMX Controller .................................................................................. 14
7.4 DMX512 Configuration ...................................................................... 15
8. Troubleshooting ...................................................................................... 16
9. Fixture Cleaning...................................................................................... 17
XP-1200F
2-