Table of Contents
Advertisement
Reverse this procedure to install the antenna board.
Speaker and vibrator module
Description
Speaker (bottom, includes vibrator module, double-sided adhesive, and cables)
Before removing the bottom speaker and vibrator module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the battery (see
6.
Remove the Middle frame (see
Remove the speaker and vibrator module:
1.
Disconnect the vibrator module cable (1) from the vibrator module.
2.
Detach the vibrator module (2) from the display panel assembly. (The vibrator module is
attached to the display panel assembly with double-sided adhesive.)
20
Chapter 5 Removal and replacement procedures
Back cover on page
Battery on page
14).
Middle frame on page
13).
16).
Spare part number
790370-001
Advertisement
Table of Contents
