Table of Contents
Advertisement
5
Removal and replacement procedures for
Authorized Service Provider parts
Tablet component replacement procedures
CAUTION:
Tablet components described in this chapter should only be accessed by an authorized service
provider. Accessing these parts can damage the tablet and void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your tablet, go to http://partsurfer.hp.com, select your country or region, and then follow
the on-screen instructions.
This chapter provides removal and replacement procedures for authorized service provider only parts.
There are as many as 15 screws that must be removed, replaced, and/or loosened when servicing the tablet.
Make special note of each screw size and location during removal and replacement.
Back cover
Description
Back cover
Display panel assembly, 10.1 IPS touch screen,
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
Remove the back cover:
CAUTION:
Before turning the display panel assembly upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel assembly.
1.
Open the microSD card cover (1) on the right side of the tablet.
Spare part number
829927-001
829929-001
Tablet component replacement procedures
11
Hide quick links:
Advertisement
Table of Contents
