Back Cover - HP Pro Slate 10 EE G1 Maintenance And Service Manual

a. Turn on or restart the device, and then press
message is displayed at the bottom of the screen.
b. Press
NOTE:
2. Select Advanced, and then select HP Touchpoint Manager Options.
3. Clear the Allow Activation check box.
4. Select Save changes and exit.

Back cover

Description
Back cover (includes rear-facing webcam lens and shielding)
Touch Screen display panel assembly (includes Touch Screen board, cables, and microphone)
10.1-in, LED, WUXGA, UWGA, AG display panel assembly for use only on HP Pro Slate 10 EE G1
tablet models equipped with WWAN capability
10.1-in, LED, WUXGA, UWGA, AG display panel assembly for use only on HP Pro Slate 10 EE G1
tablet models not equipped with WWAN capability
10.1-in, LED, WUXGA, UWGA, AG display panel assembly for use only on HP Pro Tablet 10 EE G1
tablet models equipped with WWAN capability
10.1-in, LED, WUXGA, UWGA, AG display panel assembly for use only on HP Pro Tablet 10 EE G1
tablet models not equipped with WWAN capability
Before disassembling the tablet, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the back cover:
CAUTION: Before turning the display panel assembly upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel assembly.
1. Place the tablet on a flat surface, display panel side down, with the docking connector toward you.
2. Open the I/O cover (1).
3. Remove the screw cover (2).
4. Remove the Torx5 TM2.0×4.7 screw (3) that secures the back cover to the display panel assembly.
f10 to enter Computer Setup.
If the BIOS is protected with an Administrator password, enter the password.
esc while the "Press the ESC key for Startup Menu"
Spare part number
802824-001
803619-001
802849-001
803618-001
802800-001
Back cover 23